I ordered the gasket after watching the video on how to replace it. The replacement was straight forward until I got to the bottom of the door. Compared to the video, I had much less clearance between the door edge and the face of the oven where the holes are located to accept the wire pins that are fixed to the gasket. I pushed the gasket down between the door and oven face with the pin located above the hole and facing up at a 45 degree angle pointing toward the oven. Using one flat blade screwdriver I pressed on the gasket next to the pin to push it tightly against the door. With a second screwdriver I pushed the end of the pin down toward the hole until the end of the pin engaged the hole. I then slipped the first screwdriver between the door edge and the gasket and pushed the pin securely into the hole. The whole gasket replacement process took less than 20 minutes.