Replaced door hinges. Instructions were not available on the web but luckily I still had the "use and care guide" that came with the oven. My oven hinges were secured with a pair of "door stop clips"-a spring type material that was inserted into the oven frame where the hinges were installed; these had to be removed using a screwdriver. The instructions mentioned inserting "door removal pins" in the oven hinges-I had to remove the ones that were in the replacement hinges (had to be careful and used a vice) and insert them into the hinges currently in the oven. Then I was able to partially close the door, lift the door up and towards me to remove it from the oven, I removed 8 phillips screws, the inside door panel and replaced the hinges (and install the "door removal pins"), reassemble and replace the door, afterwards, removing the removal pins (and saving them for "next time"). Only issue is that this is a dirty job due to the grease buildup around the door.