Mariann M Michigan City , IN March 09, 2020 Appliance: Maytag Gas Dryer MGDB400VQ1 Our dryer started making a noise while it was running then discovered there was no heat We changed out the upper blower housing along with the blower wheel and pulley-blower. Decided to buy the two additional (blower wheel/pulley-blower) parts as it was indicated others also had purchased along with the blower housing. We watched the video which was similar to our dryer, but not exact. Putting the drum belt on with the idler pully was difficult because it was in the back and very hard to reach. All three parts were used and our dryer us back to normal. Read More... Do-It-Yourself Rating: Repair Time Estimate: 2+ hours Tools: Screwdrivers, Socket Set
Robert C Brown City , MI December 02, 2018 Appliance: Maytag Gas Dryer MGDB400VQ0 The blower quit working Ordered the parts, watched the video, repaired the dryer. It took about 45 minutes. Read More... Do-It-Yourself Rating: Repair Time Estimate: 30-60 minutes Tools: Adjustable Wrench, Nut Drivers, Pliers, Screwdrivers, Socket Set
Richard T Fenton , MI June 15, 2018 Appliance: Maytag Gas Dryer MGDB200VQ0 Blower would not work to circulate the air though the dryer. Ordered new blower wheel, upper blower housing, and pulley-blower. Installed and working fine. Ordered, received the parts, and completed repair sooner than the appliance repair person could get there. Read More... Do-It-Yourself Rating: Repair Time Estimate: 2+ hours Tools: Adjustable Wrench, Nut Drivers, Pliers, Screwdrivers
David T Hanover Park , IL March 31, 2018 Appliance: Maytag Gas Dryer MGDB200VQ0 During operation my dryer was making a squealing whine from underneath the drum. The bearing in the upper blower housing had gone bad. Most of the machine had to be taken apart, but it was a relatively straightforward process after watching the informational how to on this site. Read More... Do-It-Yourself Rating: Repair Time Estimate: 30-60 minutes Tools: Nut Drivers, Screwdrivers
Norval M Kountze , TX October 27, 2017 Appliance: Whirlpool Electric Dryer WED7300XW0 Blower bearing bad. Replaced blower housing and bearings Fan was difficult to remove otherwise a fairly easy job. Read More... Do-It-Yourself Rating: Repair Time Estimate: 30-60 minutes Tools: Adjustable Wrench, Nut Drivers, Screwdrivers
Stanley G Dothan , AL December 23, 2016 Stripped exhaust nut Replaced the upper housing and nut. Read More... Do-It-Yourself Rating: Repair Time Estimate: 30-60 minutes Tools: Adjustable Wrench, Nut Drivers, Screwdrivers
Ryan S Sandy , UT September 21, 2014 Appliance: Model MEDB800VQO Blower was very loud Replaced the blower housing. I had a problem with the description in that it said the "blower housing with bearings". I also needed the shaft it was not clear that this unit included the shaft also. I found that another customer clarified that shaft was also included. Part arrived on time, installation was about one hour. Everything works great now and machine is as quiet as when new. Easy online order. Thank You Appliance Parts Pros. Read More... Do-It-Yourself Rating: Repair Time Estimate: 1-2 hours Tools: Nut Drivers, Screwdrivers