How to Troubleshoot & Replace Whirlpool AP6014016 / WP9759243 Wall Oven Thermal Fuse

Replaced the switch 

Did a little research & determined that the control transformer was the cause of the problem. I also changed the thermal overload as it looked like it had suffered from old age & heat exposure. 

Replaced the thermal overload fuse after determining that was the problem from some online research. 

Replaced thermal overload. Now working fine. 

Read the forum on the site and found others who had the exact same problem. This made the diagnosis easy and the fix was shown with good detail. Ordered the parts and had the oven back up and running in an hour. This is the second time AppliancePartsPros has saved me money and time. Highly Recommended! 

Replaced the thermal fuse. Placed oven in self clean mode and oven quit working less than halfway through clean cycle. After some research, it became apparent that the thermal fuse was likely the culprit. Ordered the replacement part, installed it and after placing the oven back in the cabinet, turned the breaker back on. Oven has worked flawlessly. Bonus: The part didn't cost as much as the local repair supplier and was here just as fast! Square butt driver was handy. 

Replaced the thermocouple 

EASY FIX! AFTER CHANGING BOTH BLOWER MOTORS AND MICROWAVE BULB, I USED THE SELF CLEAN CYCLE, THEN THE OVEN WOULD NOT HEAT UP! THE UNIT IS 16YRS OLD, SO HOPEFULLY THE NEW DESIGN OF THE THERMAL OVERLOAD WILL HELP? TIME WILL TELL! ALSO, ONE OF THE BLADE CONNECTORS FIT LOOSELY, SO I JUST CRIMPED IT WITH NEEDLE NOSE PLIERS FOR A SNUG FIT, AND WHILE THE BACK WAS OPEN, I CHECKED ALL CONVECTION FAN AND HEATING ELEMENTS FOR LOOSE CONNECTIONS! MY PART WAS SHIPPED FAST! THESE PEOPLE ARE ON IT! HIGHLY RECOMMENDED!+++++THANK YOU AGAIN! 

Replaced internal thermometer, did not fix the issue ( although I think it was still needed due to the F3E2 error - then replaced thermal fuse ( overload ) took all of 5 minutes to replace. Good as brand new now 

All I did was replace the fuse in back of oven. I have an Accutemp oven which was not heavy at all and no problem for one person. It was so easy, just a few screws, it can't believe I might have paid someone to fix it. When I first found my oven not working I thought I was going to have to get a new oven, but instead, $35 and ten minutes of work, my oven is back in perfect health.