Do-It-Yourself Story

Slide a butter knife from small gap at trim located at top of refrigerator door. Slide the rounded edge of knife between the white inset and chrome trim which secures the handles/white inset trim. The white inset trim then removed easily while keeping the outer/chrome trim in place. I noticed the location for screws on the replacement handles and then also ran the rounded edge of the butter knife between the two separate (upper and lower) chrome trim pieces located above/below each door handle of my side-by-side refrigerator. This revealed the white plastic handles and the screws holding the white handles in place at top and bottom of each handle. It was a 6-point star bit that I used to reverse drill and remove those screws. Swapped out the new (hard white plastic) handles which fit perfectly and were the exact dimensions and look as the prior handles (for the soft foam handles being replaced). Assembled in reverse order of how I disassembled. This took no longer than 15min to complete. Looks like new, seats perfectly in door space it was designed for and functions perfectly. [DIDN'T USE PLIERS - BUT THIS FORM WOULD NOT ALLOW ME TO SUBMIT WITHOUT SELECTING AN OPTION IN ADDITION TO 'OTHER' -- I ONLY USED A BUTTERKNIFE AND A 6PT DRILL BIT W/DRILL.