Ordered a complete GE Pump and Motor Assembly. This solved the problem. The only issues I came across were the posts on the motor to connect the ground wire and the hanger using the threaded screws in the kit. The posts were not threaded, which I reported to Appliance Parts Pros. I used a tap matching the screws to thread the posts. This solved the problem. I also replaced the copper tubing for the water with a braided ss hose. The only leak that occurred was in the drain gasket (item #505 in the drawing). It was removed and cleaned thoroughly for a better seal, once this was done there were no further leaks. All is good so far.