I watched YouTube video for my oven type. The first step was to remove the oven racks. Got up my nerve and disconnected old element from the oven with a Philips head screwdriver. There were two screws. Then I carefully pulled wires through insulation. This was the most stressful part of the repair. ( have a friend that tried to replace hers but the wires disconnected before coming through to the inside of the oven.). I unplugged the wires from the old element and plugged them into the replacement. I pushed the wires back into the back of the oven through the insulation then screwed the plate back on. I turned the oven on to test the new element. It worked as it should. After replacing the racks it was back to normal.