Removed old burner pretty much per video on your website, definitely saw the need to put some tie wraps on the connector wires going back into the back wall of the oven, but the wires on one side were so short that when old element was unscrewed, the weight of the element allowed it to pull loose from one side's connectors before the tie wraps could even be applied. Luckily, the connectors could still be accessed with needle nose pliers. Definitely needed 3 to 4 hands working together to get the new unit installed with such short wires, and sure could have used a video on how to remove the oven door before starting the project, because this oven was the top unit on a two oven / warmer combination mounted in a cabinet enclosure. (Would have been totally screwed it the wires on one side had not been accessible for pull back with pliers!)