Ordered new 2600w watt control for a 8" burner. Turned power off to stove & verified no power. Remove top back panel from stove that covers the burner controls. Pry knob off with flat blade screwdriver. Remove 2ea very small phillips screws. Let control hang by wires. Install new control by poking stem thru opening and then using the 2ea screws removed earlier I mounted the new control in place. I then swapped the wires over 1 by 1 to ensure they were in the correct location. Control was an exact replacement. Pushed the knob back onto the stem making sure it was in the correct orientation. Reinstall the back top cover. Turn power back on. Turn knob to on. Burner heats up as expected.