Do-It-Yourself Story

I pulled out the frig & unplugged it I unplugged the wire to the control. Unscrewed the two screws that at the time were holding up the reflector for the lights. Took a scraper with a very thin blade to pull the face cover for the touch screen control away to get the three screws removed that hold the control in place. Placed the control panel into the case display .. attached with the three screws. Put the touch screen back over the control without needing any glue. Enough was still on it. Placed the case into it's proper place & attached with the two screws. Re - attached the wire to the control by simple plugging it in. Plugged in the refrigerator. Opened the door & all was working correctly. Rolled frig back the 6" I had pulled it to unplug.