Removed back panel from Stove. Removed knob from front. Removed 2 small screws from under knob and pushed switch through to back of unit. Pulled one wire at a time and installed on new switch. reinstalled switch replaced knob, and plugged unit back into the wall. turned knob on and checked for arcing. All good so put rear cover back on. Pushed back into place. All done in under 15 Minutes. Ordered the part from AppliancePartsPros on Thursday afternoon arrived Monday morning Stove up and running for the noon meal. All the tools required was a Phillips Screw Driver and a nut driver for the back plate removal.