Peter S Brick , NJ December 28, 2019 Appliance: Maytag Gas Dryer SDG515DAWW Maytag Dryer Sdg515daww: Dryer model Maytag SDG515DAWW squeaking. How to replace Drum Support Roller. I've had this dryer apart a few times over the years, always got my parts here. Squeaks and igniter if memory serves. I ordered the two drum rollers that have a bearing in the center..they sit on metal shafts and freeroll. I ordered two..only one was bad but I needed the dryer up in one day, no time to disassemble and decide what to order then wait for parts. Tip: if you order the rollers, there are little washers (nylon?) between the roller and the c clips..don't lose them..they are hard to see. One of mine was missing from last time most likely, I reassembled without that washer but wish I had one, running quietly without it but I'm sure it serves a purpose and maybe that's why my roller failed (from not having that washer). Also, I would order new c clips as well in case you bend one. You have to have that c clip tool or forget it. I also replaced the belt and the idler roller that is on the tension arm but they were both ok. I just ordered anything I thought could be the cause proactively. I recommend taking some pictures as you disassemble the panels..you can forget the order they came off which is how you reassemble..reverse order that is, good for the connectors too..make it idiot-proof as much as possible haha. It would be helpful to have a 2nd pair of hands but I did it myself. I also took a sharpie and marked the colors of the wire connectors so I couldn't put them on backward. I have some mechanical experience, not sure if a novice would want to tackle this. It's be running fine for a few weeks now. $60 parts and delivery not bad..it may get me a few more years out of it knock wood. 32 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: 1-2 hours