The rubber seal on the Ice Door assembly had become warped. Purchased a new Ice Door assembly and replaced the warped part. Problem solved. Install involved unsnapping the bezel from the freezer door. Removing the control panel by lifting from the bottom and pulling it out. Unplugging the connectors from the control panel. Removing 4 screws from the switch assembly. The Ice door assembly is now accessible. Pull the door open and unsnap it by pressing inward on the top then
rotating forward and unsnapping from the bottom. Install the new door assembly by reversing the process. Be sure the rubber gasket clears the chute on the top so the door closes and seals the ice chute opening. Reinstall the switch control panel and cover. Time 5 to 10 minutes.