Frist pulled dryer out from the wall and unplugged the dryer.Took the 2 screws out of the lent filter popped the top took 2 5/16th screws out unhooked wirer to door switch lifted the front up off the two tabs on bottom of front panel set it off to the side unhooked the belt took the drum out.then took screws out of the back set off to side took 4 screws out off lent filter housing pull out on housing tip dryer foward to finish pulling filter housing out . Take a wrench or crescent wrench put on motor pulley go back to blower wheel on blower wheel I think it was counter clock wise and spin of the blower wheel off motor you may need two people one to hold crescent wrench on motor finish by taking c clamps or hold strap on motor off with flat blade screwdriver by push down and out on clamp .Watch were wirer plug is setting so you put back in same spot put new motor in and put back the same way you took it a part .