Ordered right hand bucket glide and complete ice bucket assembly (cost more than just the cover, but did so in case other ice bucket assembly parts were worn out). Replacing bucket glide was done relatively easily by first turning off the icemaker, removing the old ice bucket assembly from the glides, removing all screws on the right hand glide, and loosening the screws on the left hand glide. This allowed the drive motor assembly (which fits in slots at the back of each glide) to move enough to allow removal and replacement of the right hand glide. I then reinstalled the right hand glide screws, and tightened all screws on both glides. Once the glides were back in place, I inserted the new ice bucket assembly, turned the ice maker back on, and checked for proper operation. Done! I also now have many spare parts for the ice bucket assembly (except for the broken cover) should any other parts fail or wear out.