I turned off the electricity and water to the dishwasher, removed the two screws holding the dishwasher under the cabinet, and gently pulled it out. After removing the bottom kick plate, I put two of my daughters plastic tea cups upside down and put them under the front legs to allow better access for my hands. I removed the electrical clips, water line, then the water outlet supply from the Water Inlet Valve. The water outlet line was hard to come off before I propped up the dishwasher w/the tea cups, I couldn't get my hands under there at first to pull the line off after sliding back the clamp. I then installed the new Water Inlet Valve in reverse order, and put the dishwasher back under the cabinet and re-attached to the counter. I turned on the water and electricity and ran the dishwasher. Bu Bamm!! Success!!!