The right way to fix it is not according to the two previous people who described their repairs. There are only 2 panels you need to remove: the back top panel that spans the width of the back and the small panel marked #3 on the cabinet parts diagram (there are two hoses coming out of it). Detach the old hose from the water intake valve (part #7) by prying apart the hose clamp. The unit pulled out easily by pulling on the plastic unit, tub side. There is one screw that holds the plastic part to the "shelf" behind the controls, hence the need to remove the back upper panel. Attaching this part really takes 2 people. To aid in finding the hole in the water injector in which to place the screw, we marked the hole with a red felt tip marker. Attach the new hose in reverse order of detaching the old one. Since we had removed the front panel as one contributor suggested, we had to put it back on. The video on this website was extremely helpful for showing how to use the spring clamps to reattach the front panel. The entire process went much more smoothly with 2 people.