Appliance book included instruction on how to remove and replace the hearing element. One important instruction recommended after removing the screws holding the element, be sure to secure the electrical wires so they do not slip back into the insulation between the inner oven wall and the external back of the stove. Unfortunately, I removed the wires from the element and held one of the wires with pliers, the other wire did slip into the insulation. In order to retrieve the wire I had to remove the back of the stove and fish the wire back through the insulation into the oven in order to connect the wire to the new element. Not a bad extra job, but it added and hour to the project. Bummer! Should have clamped the end of each wire before removing the old element.