Daniel P Easley , SC October 15, 2017 Appliance: Model GSH25JFXN BB Shelf frozen water dispenser. Supports, inside the door I cut the white plastic 1 and a quarter inches by 5 inches I scraped out all the foam down to the tubing I remove two screws from the spout remove the spout shove the tubing flat up against the outside lining I drove 10 holes to the outside I put duct tape over the tubing against the holes to the outside I filled the cavity up with foam returned plastic sealed it with caulking A1 cheap fix Do-It-Yourself Rating: Repair Time Estimate: 2+ hours