Pulled out my stove and turned off the gas. Removed the oven bottom to expose the burner(2 thumb screws). Removed all the burner knobs then removed the cover under the knobs (7 screws). Removed the thermocouple tubing from oven valve(5/16wrench). Removed the burner pipe and thermocouple ( 3-1/4" screws and 5/16 and 7/16 wrenches). Cut off old thermocouple line from burner and taped on the end of the new line and pulled out the old to pull in the new line. Reconnected everything in reverse order above. And light new pilot.
While I am mechanically inclined, but never worked on a stove before. Install was completed in about 40 minutes.