Removed fabric softener cup by sliding the locking ring up and then pulling the container off. Pried open the cover cap. Stuck a 1/2" ratchet extension bar's square end in the hole of the agitator and turned left until it was loosened and could be removed. Put the agitator cam repair kit together. Put the new agitator assembly into the slot and tightened with the 1/2" ratchet extension bar. Replaced cap and snapped in place. Placed fabric softener container back on top so the grooves on the agitator matched up with the slots on the softener container. Slid the softener container's locking ring back down.