Ronnie P Hickory , MS March 15, 2020 Appliance: Model WHIRLPOOL WTW4816FW2 Washer had no cold water coming into the tub. Found black rubber trash in the screen inside the blue inlet connector. Removed screen and cleaned it. Replaced hoses. Still no water. Removed the water valve and took the screen back out. There was another screen behind that one. Cleaned it. Still did not resolve the issue. Ordered new water inlet valve from Appliance Parts Pros. Replace the valve. Problem solved. (Used putty knife to slide under the control panel on each end to release the clips. Learned this trick after taking the back panel off to no avail and then watching Utube.) 5 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes