After valuating the problems and there were more than one, one of the issues I thought was contributing water on the floor was the warped ice door, then there was the water tubing which has been deterioting due to the heat of the compressor.
Finally, I determined, the condenser fan, computer board, first need to be replaced, then the tubing for the ice and water in the door, replaced the ice door and at the same time changed out the filters and the lamp in the water door.
After replacing all the tubing, and tightening up all the fittings, I noticed more water on the floor, then I could see the water inlet valve was leaking through the housing, so one more day of down time I ordered a new water inlet valve from appliance parts pros, arrived the next day.
Now the refriderator is running like new, also vacummed out all the dust, and sanitized.
Appliance Parts Pros has all the parts, and with misc videos, and you tube anyone can change out the parts once they determine the problems with the refrigerator.
I have many years working on electronics, cars, appliances, so the repairs seemed relatively simple once the parts were determined to be the cause of the problems.
Please note: the time to complete the project took a few hours, since I ended up cleaning and polishing all the parts inside the water door and cleaning all the interior. If no cleaning this project could be completed maybe under two hours as long as the intricacies of how things come apart is figured out rather quickly, several panels on the front of the water door with the wood panels took longer to dissasemble .