David S May 31, 2015 for Model Number FGGF3041KFB I would like to replace all burners and caps on this unit, could you please give me all the part numbers I need so I can order these from you thanks
1 Answer David S. The burner heads for your unit would be the following part numbers: Left front 316558300, left rear 316438600, center 316558300, right rear 316438200 and right front 316438400. The burner caps are part number Left front 316527704, left rear 316438704, center 316527704, right rear 5304508441, and right front 5304508468. Read More...
1 Answer Hello Martha. The F10 indicates that the control detects a runaway temperature in the oven. If the oven is overheating, this can be caused by a stuck relay or contact on the oven electronic control board. If this fault code appears when the oven is at room temperature, then the failure points to a failed oven temperature sensor probe circuit or a bad electronic oven control board. If you are able to unplug the range and access the oven temperature sensor, you can check the resistance of this component with a volt/ohm meter. At room temperature, most Frigidaire oven temperature sensor probes will measure about 1100 ohms at room temperature. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More...