Brian September 15, 2021 for Model Number FEX831FS4 Regarding your reply to my question, the micro switch does have continuity when the lid is closed.
1 Answer Brian, with everything connected, if the timer measures 120VAC when tested from the black/red wire at terminal 15 to the red/white wire at terminal 24 and the unit will not lock the lid, the failure would be in the lock assembly. If there is not 120VAC, the failure would most likely be the timer 134883600. Read More...
Brian September 15, 2021 for Model Number FEX831FS4 My washer will not start. The lid lock has power to it but it doesn't lock when I pull the knob out to start the washer. Not sure if it's the lid lock or the timer.
1 Answer Brian, it would be recommended that the dark gray switch of the lid lock switch 134936800 is tested for continuity when activated. If there is not continuity, the switch has failed and the assembly would need to be replaced. Read More...
Tony July 15, 2019 for Model Number Kenmore AP417 97912704 How do I remove lid switch for my Kenmore 41797912704. Lid switch AP 4368349 Thank you
1 Answer Tony, if you remove the front panel you can get to the screws for the top and the lid switch is mounted to the top. Read More...
Mikki May 19, 2017 for Model Number FWS933FS3 I accidently bumped my washer lid and it slammed shut. Now, it won't turn on. The water won't even start. There is no sound whatsoever. It worked great before that. What could possible be wrong?
1 Answer Hello Mikki. You will need to check and see if you broke the lid lock 134936800 and if so, it will need to be replaced. Read More...
Angie January 12, 2017 for Model Number FFLE3911QW0 The connector broke for wiring from washer to lid lock. We took it apart and purchased a new lid lock and striker. We connected it the best we knew how, but the lid will not lock. I am not sure if we have the wires in the correct order since the grey one is a ground.
1 Answer Hello Angie, It looks like the part number for the harness is included with the harness 5304500476. Read More...
1 Answer Hello Pedro. You will hook up the new latch the same way the old one was installed on the unit. Read More...
Bryan March 04, 2014 for Model Number FWS1649ZAS5 How do I remove the damaged lid lock switch (part # 134936800)?
1 Answer Hello Bryan. The model number is showing an overseas model. We have no information on those. Sorry. Read More...
Tim November 27, 2013 I replaced the lid lock switch. With power off. But now all it does when lid is down and dial is set is humm.
Kisha August 25, 2013 for Model Number 417.97812704 Hi, on this model can I reset the door if is broken and how do I remove the part?
1 Answer Kisha, In order to get the door unlatched if it is locked and will not open is to use a flat blade screwdriver between the main top and the front panel. There will be 2 clips that you use to release the top. Once main top is lifted you can release the Latch and replace the door switch. Read More...
James December 07, 2012 for Model Number Frigidaire 134936800 lid switch Hi how do I bypass Frigidaire 134936800 lid switch until i can install a new switch?
1 Answer Hello James, unfortunately we are unable to assist you with bypassing the lid lock switch. Sorry! Read More...