Jim B October 27, 2022 for Model Number EW23CS70IS3 I replaced the dispenser module a couple of years ago. The water dispenses fine, however when I try to dispense cubes or crushed and I push the lever in; I hear a click like a solenoid is making, but the flap does not open and the motor does not engage to dispense ice.
1 Answer Jim, With the dispenser activating but the ice door not opening then this would be a dispenser module that is faulty. Read More...
Steve January 03, 2021 for Model Number EW23CS70IS7 Dispenser has a delay before it will dispenses water or ice. Also while holding the glass against the dispenser seems to have a short so it starts and stops during the process more and more. Thought is the Module-Dispenser, does this seem correct?
1 Answer Steve, This issue would most likely be with the dispenser module that is causing the unit to be delayed and stopping and starting while dispensing. Read More...
Alex June 19, 2020 for Model Number EI23CS55GS7 Symptoms: water would continue dispensing after removing glass and lever returns to off position. Does this periodically. The other night the ice dispenser turned on in the middle of the night and dispensed ice. Another symptom, not sure if it’s related, is the dispenser light will not turn off.
1 Answer Alex, The most likely cause for this issue would be a faulty dispenser module which would be part number 242100018. Read More...
Jon M January 03, 2016 for Model Number EI26SS55GS0 When I push the lever to dispense ice/water the item chosen will dispense as selected. However, when I release the lever the ice or water continues to pour from the door. The only way to stop the issue is to continually "flick" the damper in the door until it closes, thus stopping the ice/water. It appears the module dispenser (Frigidaire Part #AP4527312) is no longer available. Ideas?
1 Answer Jon, The part number for the dispenser module on your unit will be 242100018 which will be the most likely cause for your issue. Read More...
Lorena November 17, 2015 for Model Number EW23CS65GS1 I have a problem with my fridge, the dispenser dispenses water with no problem and the ice maker makes ices but when you push the lever it doesn't dispenses ice. I had a technician over my house to check it and the motor works fine and he told me it was a "board". Can you help me figure out what's the spare part that I'm needing. Thanks
1 Answer Lorena, The most likely control board that would be needed is the main control board 5303918558. Read More...
Wes October 19, 2014 for Model Number EW26SS65GS0 The ice/water dispenser has developed a slight time delay between the release of the dispenser lever and the shut off of the water and or ice. Sometimes it completely fails to shut off and only switching from ice to water or vise versa turns it off.
1 Answer Wes, Based on the problem description it sounds like the issue would be with the dispenser module for your unit. Read More...
Brian H. October 06, 2014 for Model Number ew26ss65gs0 My water dispenser comes on by itself. I come home and find water all over the place. It happened twice before I caught it acting up. Would this most likely be a control board or a dispenser? Thanks, Brian Hanna
1 Answer Hello Brian, This can be an issue with the wiring harness at the door hinge, a switch on the dispenser module 242100018, or a bad dispenser display board 5303918582. Read More...
Mark K. August 05, 2014 for Model Number EW23CS65GS2 Making improvements in reducing the drips on the dispenser tray but have not eliminated them yet. Replaced the valve on the back of the unit (AP5671757). Then replaced the Module-dispenser (AP4527312). Door appears to slam shut securely when the lever is released, and from the inside of the door appears to be closed properly. When I do look up the chute, I continue to see condensation. Not as bad as previously, but still requires wiping up once or twice per day whether it be in the evening or during the day. Freezer at 0, refrigerator at 40 degrees.
1 Answer Hello Mark, The condensation in the ice chute proves that the ice door cannot be seating properly. Read More...
Meir T. June 01, 2014 for Model Number Electrolux Refrigerator Module Dispenser My refrigerator works perfectly. I have a little problem with the ice dispenser, (the piece that you push with the glass to get water and ice is broken). Do you sell the dispenser complete?
1 Answer Hello Meir, It appears that you were viewing the complete assembly. Whether it is the correct one or not can only be determined by looking it up by the model number on your units' I.D. tag. This is usually found on or near the fresh food compartment ceiling, (depending on the model). Read More...
Norbert M March 23, 2014 for Model Number ei23cs55gs1 1) Water and ice turns on by it self and will not turn off. I have to put in lock position to have it stop. 2) Freezer side working, other side not cooling 58 degree.
1 Answer Norbert, The most likely cause for the 2 issues that you are having with your unit would be the main control board 5303918558 being faulty. Read More...