Jojo July 15, 2019 for Model Number Frigidaire FGMV174 How do you replace a door Microwave latch Spring? and how much does it cost to buy the spring? Thank you
1 Answer Jojo, To replace the spring you would remove the inner panel of the door by getting between the inner and outer panel with a putty knife. You will pop off the inner panel and will have access to the spring inside the door. Read More...
Janice April 10, 2018 for Model Number FGM0205KFB When you push the release latch the door will not open. What is the problem?
1 Answer Hello Janice, On model FGMO205KFB you will need to remove the air grille and the control panel to access the door release mechanism to determine what part is failing. Sometimes this can be adjusted to correct the issue but sometimes a part like 5304485407 has to be replaced. Read More...
Beverly B September 09, 2014 for Model Number GLMV169DBB I just purchased from you a latch door 5304440314 because I thought that something was missing...what does the spring hook onto on the bottom of the spring?
1 Answer Beverly, The should be a hook on the door that the lower part of the spring will attach to in order to work properly. Read More...
D.J. November 21, 2013 for Model Number FGMV174KFA How do I get inside the door to verify the spring is broken?
1 Answer Hello D.J., There is a plastic part around the inside of the door that is only about an inch wide. This is called the frame on this model. It clips into the door assembly from both sides of it. This makes it necessary to pry it carefully out using two small flat blade screwdrivers. You need not worry about getting it out on the hinge side of the door since you can work around the part when it is released from the door on three sides, (top, bottom, and handle end of the door). Be extremely careful with it since, if the retaining tabs are broken off, the frame will have to be replaced. Read More...