Grant July 11, 2020 for Model Number GSD4000D35BB My dishwasher will not drain anymore. I removed the bottom panel and watched when it reached the drain stage to see what happens. The solenoid armature snaps down and I see inside the pump housing a door flaps and there looks like water in the pump housing. Seems like the flap isn't shutting all the way. I've checked for blockage in the drain hose and pump housing and didn't find anything. Do I need to replace the solenoid armature only? Thanks. Grant
1 Answer Grant, This would most likely be either the drain solenoid that is faulty or would be a drain impeller that is damaged if the unit is not draining at all. Read More...
Evon September 19, 2014 for Model Number GSD3200G00CC My Dish washer done not drain completely. What part do I need to replace to get the dish washer to completely drain. Thanking you in advance for your help. Evon
1 Answer Hello Evon. Check and make sure there is no clogs in the drain system. If there is no clogs, look and see if the drain solenoid WD21X10060 is bad and will need to be replaced. Read More...
Les June 21, 2013 for Model Number gsc1200t04ad When the dishwasher drains water runs out of drain solenoid. I was told the whole pump needs to be replaced. Is this true or can a new solenoid kit be bought. Thanks
1 Answer Les, If the unit is leaking from the seal on the housing where the solenoid connects then you would need to replace the whole pump assembly. Read More...
Jenny August 25, 2012 for Model Number GE portable dishwasher This plunger part fell out when we were moving. How do we reinstall it? Thanks!
1 Answer We will need your model number to help you with this. Please post your model number with a new question on the parts page. http://www.appliancepartspros.com/modelnumber_locator.aspx Read More...
Mary August 11, 2011 for Model Number gsc3400j00ww Hi could you tell me the purpose of this part what does it do and what problem does it cause if it don,t work right. This part falls off when you tip the washer back. Are we missing something to hold it on or do we have it in wrong? Could you send a picture of how it should be installed ? I am having trouble with my dishwasher filling. The water keeps draining out. The water is running in ok but it keeps drainning out it will not fill.
1 Answer Hi Mary. This is the drain valve solonoid plunger. It is part # WD21X10060. It will allow the water to keep draining out if it is not functioning as it should. Thank you. Read More...