Nick March 20, 2022 for Model Number PFSS6PKXDSS My water/ice dispenser panel is acting up. It randomly displays turbo cool and the temperature lights come on and off displaying varied temperatures, calling for turbo cool while the refrigerator temp gauge shows the refrigerator is holding steady. The temperature inside the refrigerator does not match the display and the compressor runs and seemingly the refrigerator gets satisfied. I have already reset the water/ice display by pressing energy saver and adjust light simultaneously. It seems the display is acting up. I am wondering what could be the problem. The main board? I have already replaced all temperature sensors in the refrigerator section. please let me know what you think thank you
1 Answer Nick, based on the information provided, the failure would most likely be the user interface dispenser control WR13X10841 as it is acting erratically. If the display was flickering as if there was intermittent voltage reaching it, a voltage test would identify if the failure would be in the main control, wire, or user control but this does not appear to be the case. Unfortunately, the dispenser control has been discontinued by the manufacturer and is no longer available. Read More...
Dennis July 15, 2021 for Model Number PFSS6PKWBSS The control panel continuously beeps, changes showing temperature changes and ice and water buttons regularly do not work. This is a ge profile French door with bottom freezer. All else is good. Any help will be appreciated. Thank you
1 Answer Dennis, This issue will most likely be caused by a stuck key on the dispenser control which is part number WR13X10551. Read More...
Cory Pinter October 23, 2020 for Model Number PFSS6PKWBSS Will this part WR13X10841 (AP4485146) work with GE Profile Fridge model no. PFSS6PKWBSS?
1 Answer Cory, The dispenser cover assembly for your unit has been discontinued and the manufacturer does not show a suitable replacement available. The part you are inquiring about looks like the part for your unit but we cannot guarantee that it will work for the model as there may be some differences internally that we do not know of. Read More...
Ray November 10, 2017 for Model Number pfss6pkxss My Display is constantly turning different options on and off on its own. I believe i have to replace the display but I am unsure which part number I need to order. Looking online, I can see that my refrigerator is discontinued and its hard for me to look up a match for my model. Would you be able to help me determine which part number I need to purchase. I am looking for an ASM cover dispenser
1 Answer Hello Ray. We will need your full model number to help you with this. Please call 1-877-477-7278 or post your full model number with a new question on the parts page. http://www.appliancepartspros.com/modelnumber_locator.aspx Read More...
Michael August 24, 2017 for Model Number PFSF6PKXEWW How to remove the ice and water dispenser control panel so I can replace it with part #WR13X10884? I see the screw underneath but how do I deal with the tabs that are holding it in?
1 Answer Hello Michael. Remove the screw under the dispenser and then grasp it and pull forward to remove it. It will not come out easy. Thanks. Read More...
Sam August 13, 2017 for Model Number GFSS6KKYESS I have to replace the ASM Cover Dispensor part # WR13X10888 and have removed it. Will fridge work ok until tomorrow when the parts stores are open Sam
Steve September 02, 2016 for Model Number PFSS6PKXDSS How do I remove the old ASM-Cover Dispenser (AP4485146) so I can replace with a new one?
1 Answer Steve, There is a screw under the cover that you will remove and then grab the opening and pull to the right and pull out on the cover to remove. Read More...
Ryan August 23, 2016 for Model Number PFSS6PKXCSS I have a GE French Door frig model PFSS6PKXCSS. The issue I am experiencing is the LED dispenser light will go on and off on its own. Now today the frig stopped cooling and the door key pad was locked up. I cycled power and was able to view the current temp but then it cleared and would not allow me to change any selection on the door. Does the door dispenser control board have any effect on the ability for the main control board to operate the cooling ability or is this a possible separate issue? You thoughts would be greatly appreciated. Thank you!
1 Answer Hello Ryan. It sounds like the dispenser assembly WR13X10841 is bad and will need to be replaced. Read More...
Jerre February 25, 2016 for Model Number PFSS6PKXDSS I need instructions on how to remove the ice dispenser control panel part #WR13X10841. I have spent hours online searching for a video but all I have found are simple and not like the panel on my unit. Thank you
1 Answer Jerre, To remove the dispenser cover, there is a screw underneath you will need to remove and then grab at the opening where the ice would come out and pull to the right and straight out. Read More...
Conrad T July 14, 2015 for Model Number pfss6pkxcss I asked you guys why my key pad selector would not respond to touch to change to ice, light, etc and your recommended and I ordered part number wr55x129 which for another refrigerator with manual selector control. ref 12387379. looking at the picture I see no control board unless it comes with asm pad. please advise.