Andy October 15, 2017 for Model Number GSD2100V35CC I purchased the part and followed your video on how to replace the sprayer arm base GE part number WD12X10244.on the great GE dishwasher model GSD2100V35CC. It broke when attempting to clean the filter by lifting up the sprayer arm with the secret tab hidden behind the base. I did everything as shown to install the new part Once I got to unscrewing the rubber connection, (after removing the clamp and pulling out pump motor), the rubber connector would not turn. No matter how hard I tried. So, I used a 6 inch long piece of 2" PVC piping and clamped it on the rubber connection and finally it turned.And turned, and turned. Problem is it turned both the rubber connection and the sprayer arm base. It's like they are one piece welded together. I see no way to dislodge the two parts.. Any suggestions besides dynamite? Thank you
1 Answer Hello Andy. The only trick to unscrew the base WD12X10244 is the screwdriver in the slot and pry. It should break loose and come out. There is no other tricks. Sorry. Read More...
Priscilla March 09, 2014 for Model Number GSD2100N10WW I broke the tab on my base spray arm for my GE dishwasher (GE part #: WD12X10244, on your parts site it's part #: AP4300545). I'm trying to find out how I would go by replacing the part after I order it. I can tell it has to be unscrewed from the diagram but I don't know if I have to unscrew it from the inside of the dishwasher or from underneath the dishwasher. If you could please help me out I would really appreciate it. Thank you.
1 Answer Priscilla, you'll stick a screwdriver into the spray arm base and unscrew it from the unit. This is done from the inside of the dishwasher. Thanks. Read More...
Fred February 28, 2014 for Model Number gsd2101n10ww How do I remove the base of the lower spray arm on a ge dishwasher?
1 Answer Hello Fred. You are correct. You stick a screwdriver into the spray arm base WD12X10244 and unscrew it from the unit. Read More...
Hugh M. October 29, 2012 for Model Number like GSD2100VWW Trying to get model # of a 2005-2006 GE dishwasher very similar to current #GSD2100VWW. I need some parts for the spray arm assembly.
1 Answer Hello Hugh! Unfortunately, we do not have specs available to each model to verify similar models. Sorry about that! Read More...
John February 05, 2012 for Model Number GSD406ON10SS How do you remove this part I see the threads but it only turns a tiny bit and I put a srewdriver threw to try and twist and its still not wanting to move its going to crack before it turns.I have to remove as I broke the clip removing the spray arm
1 Answer Hello John. You are correct. You stick a screwdriver into the spray arm base WD12X10244 and unscrew it from the unit. Hope this helps. Read More...