Customer Questions and Answers for Mounting Plate W/ Manual by Ge

Hello Maria, We will need you to post a new question including the model number from the stoves' I.D. tag also, so we can check to see if there are parts available for this job. Thank you for your patience and understanding in this matter.

Hello Anthony. To change the glass in an oven door, you will need to determine how to remove the door on the model number you are working on. If you open the door to the first stopping point, some oven doors will lift off the unit in this position. On other models, you will see clips on the back of the hinge toward the opening where the hinge enters the range. If yours is like this, you will open the door all the way open, then pull the clips down until they stop and lock in place. Then close the door to the stopping point and lift the door off the range. If you door does not lift off, and it does not have the clips, then you will open the door all the way open. You will see a hole in the hinge at the bottom of the door. You will insert a pin or nail into that hole and close the door to the stopping point. Then you can lift the door off the unit. Once the door is removed, you will lay it on a soft surface and disassemble the door. Pay attention and make notes if needed for reassembly of the oven door. Once you have replaced the door glass, you will reinstall the oven door back onto the range in reverse order of the way you removed it.

Hello Jason. You will need to order WB01X10132 for the hardware kit and WB56X35363 for the mounting plate.

Marie, Th part number for the mounting plate on this unit will be WB56X10608.

Henry, This is a countertop microwave only and would not have a over the range mounting bracket.

Omeika, The correct parts to order for the model number you supplied are WB56X11009 / WB56X11009 Mounting Plate and if you need it WB01X10298 / WB01X10298 Installation Hardware Kit. Both parts are in stock and available at this time. Thanks,

Hello Lawrence. You will need to order DE70-00561A for the unit.

Joseph, The mounting plate for this unit will be WB56X10862 and the hardware kit will be WB01X10181.

Craig, The wall mounting bracket for your unit will be part number WB56X10862 and the mounting hardware kit is part number WB01X10181.

Hello Maria. WB56X10862 is the mounting plate for the unit. The bolts needed WB01X10067 has been permanently discontinued by the manufacturer and we don't know of any source or replacement for the part.