Customer Questions and Answers for Orifice Spud (Nat Gas) by Ge

Steve, For the natural gas orifice for the bake, you would need the oven safety valve WB21X21506. For the broil orifice, you would need to get part number WB28X20389. For the top assembly you will need to get the following parts Center WB28X25592, right front WB28X25593, left front WB28X24761, left rear WB28X24763, and right rear WB28X24850.

Toby, For the natural gas orifices on your unit, you will need part number WB28K10033. For the oven, you would loosen the orifices 1 1/2 to 2 turns and close the air shutters to about 3/4 of the way open.

Burton, To get the Natural gas orifices you will need to replace the tubing which has the orifice on it. The part numbers you will need are for the left front WB28X24761, Left rear WB28X24763, center WB28X24762, right rear WB28X24764 and right-front WB28X24766. The oven orifices you just loosen 1 1/2 to 2 turns, close the air shutters to about 3/4 of the way open and on the regulator flip the cap from LP to Natural.

Steve, there are two orifices that are used in this particular model. The 1.07mm orifice is part number WB28K141 and the medium orifice is part number WB28K5095. Unfortunately, the medium orifice has been discontinued by the manufacturer and is no longer available.

Sarah, The part number for the LP conversion kit on this unit will be WB49X20214.

Hello Suzie, You will need to order one of each of the following to obtain the natural gas orifices for the model provided. WB28K10868 for the center burner, WB28K10812 for the right front, WB28K10813 for the left front, WB28K10815 for the left rear, and WB28K10817 for the right rear. The bake and broil orifice hoods are adjustable by turning them 1 1/2 to 2 turns counterclockwise and adjusting the yellow tipping from the flame with the air shutter. You will also need to flip the gas stop in the regulator to complete the conversion.

Bill, To convert this unit back to natural gas you will need the orifice holders left rear WB28X20836, right front WB28X20832, right rear WB28X20834, center WB28X21077, and for the front left you will need the inject top burner assembly WB16X20608.

Betty, We would need to have the model number of your unit to be able to assist with your question.

Hello Jennifer, You will need to order one WB28X20451, one WB28X20619, and two WB02X20722. Since out of stock it will take 5 to 6 days for these to be shipped out to you. Thank you for your patience and understanding in this matter.

William, The natural gas orifices for this unit will be LF WB28T10014, Left rear WB28T10015, right front WB28T10027, and right rear and center WB28T10028.