Thomas B November 10, 2014 for Model Number GE GSC3230Z03WW Have a GE portable dishwasher model #GSC3230Z03WW Would like to permanently install to plumbing approximately 57 inches away from sink drain and water supply. Was told could not do because pump in dishwasher not powerful enough to drain water that distance . Can you confirm or suggest alternative. Kitchen setup is too small to locate dishwasher closer, therefore portable has been the alternative. Any info would be greatly appreciated. Thank you
1 Answer Thomas, That is correct as the recommended distance for a dishwasher would be no more than 4 foot. Read More...
Patrick February 12, 2014 for Model Number inglis x038001 Is the picture match the real one? My unicouple has the same kind of lock mechanism.. So I guess WD1X1447 is the right faucet adaptor?
1 Answer Patrick, the image is what you'll receive when you order the part. However, this is used on GE dishwashers. The Inglis model supplied is not pulling up in our system. If you are still needing help please verify the model and serial number and repost for further assistance. Thank you. Read More...
Johnny February 07, 2014 I just need the washer that goes inside the part that attaches to the sink. Where can I get one?
1 Answer Hello Johnny. We will need your model number to help you with this. Please call 1-877-477-7278 or post your model number with a new question on the parts page. http://www.appliancepartspros.com/modelnumber_locator.aspx Read More...
Jeanne August 19, 2013 I have the unicouple attachment on my spacesaver (portable) washer but I need a longer hose. Does GE make a longer unicouple?
1 Answer Hello Jeanne! Unfortunately, the manufacturer does not offer a longer hose. Sorry about that! Read More...
Casey July 15, 2013 for Model Number gsc3230z00ww I am trying to locate an adapter for this portable ge potscrubber dishwasher to connect the water input hose assembly to my faucet. I have been unable to locate the model number that is on my appliance anywhere. The closest model number I find is not a portable. Can you help?
1 Answer Casey, according to the model the faucet adapter is part number WD1X1447. Thanks! Read More...
Leonard H June 17, 2013 for Model Number GSC3400f00BL I'd love to buy part WD35X194 (the unicoupler) for my GE Nautilus portable dishwasher, but there does not seem to be an easy way to replace the old one. Do I have to take off the top, and then the outer shell, first, or is there a simpler solution? I'm unemployed and really can't afford a new one or to have this one "professionally" repaired. It leaks at the faucet where the four plastic "discs" are worn, otherwise, it still runs great. Thanks.
1 Answer Leonard, It's not a real easy repair to make, but then it's not that hard either. Yes, you will need to remove the top panel, as well as the lower access panel on the front, below the door. Disconnect the fill hose from the valve and the drain hose from the pump connector, it'll be a bit tight, but doable. Removing the coupler pocket WD12M79 from the back of the cabinet will make it a bit easier to work with, but isn't mandatory. Cut or remove any retainers(wire ties) and pull the assembly out of the unit. Reverse the process and you're done, It shouldn't takr that long or be that difficult. Read More...
Adiany April 21, 2013 for Model Number 66517439002 I have the unicouple kit but how do you hook it on your faucet? I tried but it won't stay in place. Do I need an additional part? Thanks!
Melissa January 02, 2013 Is there any sort of kit that can be used to simply replace the small innerworkings that have gone bad?
1 Answer Hello Melissa. No, If the coupling is bad, you will need to order the assembly WD35X194. Read More...