Preacher June 17, 2020 for Model Number DV395ETPASU/A1 The dryer was used very little. Belt is good and motor is humming and clicking off but no drum movement. i want to replace the PCB but no luck finding the part.
1 Answer Preacher, It would be suggested to check the rollers for binding and if they are good then the motor would be a more likely issue. If the motor is humming it is getting power to it but not starting. Read More...
Dave December 09, 2019 for Model Number DV395ETPASU Like many people my dryer will run unless I open the door or unplug it. I see that I need a new PCB, P/N :DC92-00669J but it is out of stock, no longer made, cant even get it on eBay.... has anyone found a PCB that will work? can I use DC92-00669Y which is for a very similar dryer? anyone out there having any luck with this currently?
1 Answer Hello Dave, yes, main control board DC92-00669J, is discontinued and no longer available, once a manufacturer has discontinued a part there is no substitute part that will work. Read More...
Gregory W April 15, 2019 for Model Number DV395ETzpASU/A1 I am searching for a part for my Samsung dryer the part # is DC92-00669J It is the power control board. Which Samsung no longer stocks. Please help.
1 Answer Gregory, Unfortunately the manufacturer has discontinued this control board with no suitable replacement available. Read More...
James October 18, 2018 for Model Number DV395ETPASUA1 I have a Samsung dryer and the part needed is no longer available through Samsung. It has been discontinued. Is there another control board that would be compatible with this dryer? The part number needed is DC92-00322M or DC92-00669J Is it possible to have this part refurbished?
1 Answer Hello James, I'm sorry but this part has been discontinued by the manufacturer and no satisfactory substitutions have been provided. You might be able to get a company like Corecentric Solutions 866-737-2244/ corecentricsolutions.com to refurbish the board for you. Thank you for your patience and understanding in this matter. Read More...
Scooter November 10, 2017 for Model Number DV395ETPAWR/A1-0000 First the main control board burned up. What could cause this? The top right component melted the connector including the metal female spade tip. Since there is nothing left of the female connector can I make my own connector or does this need a new wiring harness?
1 Answer Scooter, A loose connection would be the most common cause for a part and the wire to burn up. You can install a new 1/4" connector to attach the wire to the board. Read More...
Gary B April 19, 2017 for Model Number Samsung DV393ETPAWR/A1 do the electrical connectors on the pcb board just pull off. Can not seem to get them to budge
1 Answer Gary, Yes the connectors on the pcb should just pull off but on some there will be a tab that you have to depress to lift them off. Read More...
Tyler September 12, 2016 for Model Number DV393ETPAWR/A1-0001 My dryer keeps tumbling at all time when the door is closed. The heating works, as long as it is turn on and in the cycle. The drum turns with the unit in the 'off' position. I replaced the control panel and the door switch. What else could it be? PCB? Thanks T
Jewlene July 28, 2016 for Model Number DV395ETPASU/A1 I ran into a previous question having my same issue. My dryer will not heat and does not shut off until I open the door, even when powered off. Your answer was the PCB main control board needed to be replaced. I just need to know if the boards are the same for all of them or do I need to order a different control board for my specific model #? The model # on the previous question was slightly different
James February 12, 2016 for Model Number Dv395ETPARA/A1 My dryer will not heat and only shut off if I open the door what could it be?
1 Answer James, The most likely cause for the unit not shut off would be the main control board which is part number DC92-00669J. Read More...
John December 21, 2014 for Model Number DV393GTPAWR-A1 / Samsung /Gas Dryer / 13 mo's old Dryer burner runs 15 seconds than turns off, replaced the hi/low thermostat, still same result. When I take off the hi/low thermostat off the burner tube (set off to the side) dryer runs fine... Thanks....
1 Answer Hello John. Based on the information you provided, it sounds like the gas valve is bad and will need to be replaced on the unit. Read More...