1 Answer This could be a broken belt or voltage supply issue as well. Here is a video that may help: https://youtu.be/jX-AI3jXzL4 Read More...
Kong April 09, 2020 for Model Number DV405GTPAWR/AA 02 Samsung dryer powers on but will not start up after i push the start button. i replaced the thermo fuse but it still will not work. Thinking power board now?
1 Answer Kong, • All connectors are plugged in correctly. • Dryer is plugged into the power outlet. • Check if house fuses or circuit breaker is blown. • Check if the door is closed properly (if it is open, “do” will light up). • Check if the rotary selector dial works well. • Check if Control Board is good. • Check if the belt is cut off or Belt Cut-off switch is initiated. • Check if Drive Motor is spinning properly. Read More...
Allen January 13, 2020 for Model Number DV36J4000EW/A3 I have a Samsung Model DV36J4000 EW/A3 -drum spins but heating element does not heat? The cooldown cycle on the control panel stays on all the time. Could this be because the control panel is bad? Thanks, Allen
1 Answer Allen, Yes it is possible for the control board to be the issue with your dryer, but there are other things and components to check first. Do you have the proper power to the dryer, is the heater element intact, do all the thermostats and cut out thermos have "closed" circuits, and more. You shouldn't replace the control board on a "maybe" at least do the basic checks first. Read More...
Indio March 06, 2017 for Model Number DV405ETPASU How would you know if the switch or electronic control board is the problem? The dryer is connected, but the it is in off position. You close the door and the machine starts working.
1 Answer Hello Indio. Based on the information you provided, it sounds like the main board is bad and will need to be replaced on the unit. Read More...
Jeffrey F January 11, 2017 for Model Number DV405GTPASU/AA-0000 I am trying to repair my dryer. I have purchased a new board but it still does not work. My symptom was at first that the dryer would not shut off. That meaning the drum kept turning even when you switched the power off. it only stopped when you opened the door. so I bought a new board put it in and it didn't work. (it turned out to wrong one). So I plugged the old board back in and it worked fine. power switch worked drum turned off as I cycled through a couple tries for heating. I unplugged board to put it back on mounting plate put back together and I get nothing. I mean no display nothing. dryer doesn't even light up. I am hvac technician and am puzzled. I have tested all my safeties including door switch and all are fine. I have power into my board but it seems to go no where. Even with another new board that is the exact model. The two large relays that carry line voltage to the board start and remain open. How does the board get power? How much voltage goes to the control panel? That's the only other thing it could be but if I get no voltage to the pins going to control panel I m stumped. Your thoughts please.
1 Answer Jeffrey, If you are getting no voltage to the control panel then the main board is not sending power out. There is 120 vac into this main board but no voltage going out of the board and the main board would need to be replaced. The part number for the main board will be DC92-00322U. Read More...