Stuart December 06, 2021 for Model Number NX58R4311SG the power went out the other day and when it came back on the range panel does not work. No clock or other functions. it has been over 24 hrs. Stove top works but no baking. Is it the panel?
1 Answer Stuart, if there is 120VAC reaching the oven control DE92-02588G, then the control has failed and would need to be replaced. Read More...
Judy November 06, 2021 for Model Number NX58H5600SS/AA My bake and broiler do not work. I keep getting a beeping noise and it has a -5e- on the display.
1 Answer Hello Judy, The SE on the display indicates a stuck key. You will need to replace the membrane switch DG34-00027B to correct the units' operation. Read More...
Cliff September 08, 2021 for Model Number NX58R4311SS/AA lightning struck and there was a pop from the range and now it won't light up do you thinks it's the control panel
1 Answer Cliff, it would be recommended that the power supply going to the main control DE92-02588G is tested to identify if it is receiving voltage or not. If it is, the main control has certainly failed. Read More...
Al Tharp August 09, 2021 for Model Number NX58H5600SS/AA-0000 The bake option on my oven is not working. The cooktop works fine. The broiler works fine. I can see that the igniter is glowing good for the bake burner but gas never comes on to ignite. What might be the problem?
1 Answer Al T, Based on the information provided I would check for 3.2 to 3.6 vac to the gas valve, if you have the voltage the valve is likely bad. If you do not have the voltage then the ignitor is likely the issue. Read More...
Oscar July 20, 2021 LCD ribbon cable clip. Does the control board come with a ribbon cable clip to hold the LCD ribbon cable or is that a separate part number?
1 Answer Oscar, The main control board will not come with the ribbon harness and we would need to have the model number to be able to determine what you would need. Read More...
Marshall April 02, 2021 for Model Number NX58H5600SS The range started beeping then the error code - tE - came up. Troubleshooting manual says "check Touch PBA Signals". None of the buttons work. Turned the unit off for a minute then back on, same thing happened. Flashed "12:00", none of the touch pad buttons worked then it beeped and error code tE came up again. Is this the touchpad membrane, the main assembly or both? Thanks
1 Answer Marshall, with the range power cord unplugged, the touchpad DG34-00027B ribbon would need to be inspected to identify if there is a broken or damaged section. It would also need to be inspected to identify if it has a loose connection in the main control DE92-02588J. If there is not a damaged section of the ribbon and the connection is not loose, the failure would likely be in the main control. Read More...
Matt December 09, 2020 for Model Number NX58M5600SW/AA-00 I have the indicated model of a Samsung range where the burders work but I get no response to either bake or broil. The display has a "d" next to the time. Everything I have read suggests I need to replace the motherboard and that the correct part is DE92-02588J. The part you show looks very similar, except the connector on the left side on your part, which I think comes from the display,is a tape-style connector. The one in my oven does not have a tape connector and instead connects at 2 points on the motherboard with push connectors. I can send a picture if that would help.
1 Answer Hello Matt, we checked the manufacturer's site and using the model number you supplied they list the main control board is listed as DE92-02588J DE92-02588J. If this part does not seem correct for your model and the model number has been confirmed, suggest you check over the original control board and see if there is a label/sticker with a similar but different part number. Read More...
Tiffany September 03, 2020 for Model Number NX58H5650WS/AA-0000 Gas top works, oven doesn't come on when pressing any of the buttons and pressing start/set.
Ron December 15, 2019 for Model Number NX58H5600SS/AA There are several touch pad buttons that no longer work on our Samsung. They are: Bake convection Bake Broil Favorite Cook Self Clean Bread Proof Cooking Time Clock Light We can still use the Roast button to cook in the oven. What parts do I need to replace?
Rose December 04, 2019 for Model Number NX58H5600SS/AA-0000 I cannot set the time on my gas range and I can use my oven, but I cannot turn it off.. I have disconnected to turn of oven, but that is about it. Help!
1 Answer Rose, For this issue of some buttons working but others not then the issue would be the membrane switch DG34-00027B. Read More...