Mike January 28, 2021 for Model Number RS277ACRS/XAA-0000 Thanks for the quick response on my Ice Bucket cover removal question! I have one quick follow up: When you talk about using a putty knife to gently move the tabs, we're talking about the two tabs at the top/front of the ice bucket that connect it to the front cover, correct? Thanks again :-)
Mike January 28, 2021 for Model Number Samsung RS277ACRS Same question as the others, I received the ice bucket but can't figure out how to remove the front cover without breaking something. It looks like maybe there's one clip on the bottom where the ice chute is that it attaches and then the two on top where the bucket slides in to the front cover. Any help is greatly appreciated!
1 Answer Mike, the lock tabs can be gently moved using a putty knife so that the front cover can be removed. Read More...
Robert November 27, 2019 for Model Number Samsung RS277ACBP-XXA How do you install the auger in a new DA63-03507B - TRAY ICE-BUCKET?
1 Answer Robert, You would need to take the front off the ice bucket which should be clipped in place. Once this is removed there will be screws under it that hold the front to the ice bucket that you will need to remove and slide out the auger and install in the new one. Read More...
John October 16, 2018 I can’t for the life of me figure out how to remove the front of the ice cover. I’ve read all the q an a questions and used a putty knife but unless I break it off nothing will work. Please help! Thanks.
1 Answer John, If you can send us your model with another question we will try to get a disassembly diagram for you. Read More...
Henry K September 02, 2015 for Model Number Samsung RS277ACPN I just received parts DA63-03507b (Order # 5789949), tray ice bucket. I have problem in dis-assemblying the front cover of the ice bucket assembly. Your existing answer said use a putty knife. The question is where and also which way to push the front cover in order to dislodge? If you have a diagram, they will help tremendously. The ice maker assembly was easy to install. I saw the you-tube and got it done in 7 minutes. Thanks Henry kwohh@yahoo.com
1 Answer Hello Henry. You will go around the edges of the cover to release the locking tabs and unsnap the cover off of the bucket. Be careful not to break the part as your unsnapping the cover from the bucket. Read More...
Glynn April 20, 2014 for Model Number Samsung RS277ACBP Trying to replace ice bucket to main cover(front). Can't find anyway to disassemble without breaking off bucket. Are there some tabs to be pressed?
1 Answer Glynn, The bucket just clips to the ice bin front and you would use a putty knife to get it unclipped. Read More...
Rick April 10, 2014 for Model Number da63-03507b ice bucket How to remove old samsung ice bucket as the plastic is so brittle?
1 Answer Hello Rick. You may have to bust the bucket if it is real brittle and then replace it. It shouldn't be brittle enough to break apart. Read More...