Mark August 24, 2019 for Model Number KSM90WW0 The parts diagram shows what appears to be 4 of these washers required ( AP6019540). I only found 3 in my machine. One of the washers was on shaft 19 above part 21. The diagram shows the washers all on either side of part 27 on shaft 19. How many are required and what is the proper placement.
1 Answer Mark, the shim washer WPW10323378 would be placed in between the gear hub W11192794 and base, as well as on the shaft as it is located on the other side of the base (opposite side of the hub). These are used as needed as they are used to align everything together. As three were in your unit, three would be needed and placed in the same locations they were originally in. Read More...
Veronica December 20, 2017 for Model Number KSM150PSAQ0 How many washers do I need to order one or two washers?
Amy October 05, 2015 for Model Number KitchenAid K45 I'm not sure how to use your cross referencing tools. Are any similar washers made for other models that might work with mine? The part number is 3180163.
1 Answer Hello Amy, The seals for the washing machine water supply hoses are 285448A. If you need the ones with screens 285452A. Read More...
Ron R. December 05, 2011 for Model Number ksm90 1:Does that mean the manufacturer has determined the washers are not REQUIRED for the machine to operate properly? 2: Has the manufacturer compensated for non use of the washers by making a dimensional change on the parts the washers were used on?
1 Answer Hello Ron. The manufacture does not specify if the unit can be used without the washer WPW10323378. If you order this part number, you will have the washer to install on the unit. There is some of these available as of 12/06/2011 to order. Hope this helps. Read More...