Customer Questions and Answers for Dishrack (Dishwasher Rack) by Whirlpool

Best Seller

Manufacturer Part

Dishrack (Dishwasher Rack)

4.89 (64)

By: Whirlpool

Part Number: OEM17965992

Manufacturer Part Number: W10833650

Restore smooth loading and secure placement for your dishes with this replacement dishrack. Replacing a bent, rusty, or damaged rack helps keep items upright, improves spray coverage, and prevents flaking or broken tines from contaminating the wash. What it does

Holds and organizes dishes, bowls, and cookware during the wash cycle
Slides on the rail system for easy loading and unloading
Helps maintain proper spray coverage and drainage for effective cleaning
Common symptoms of failure: rusted or broken tines, peeling rack coating, rack wobbling or derailing, poor rolling, items tipping over

What's included

1 dishrack

Install notes

Disconnect power and shut off water; open the door and fully extend the rack
Remove rail stop clips/end caps as applicable and slide out the old rack; wear gloves to avoid cuts from sharp edges or rust
Transfer any reusable accessories (silverware basket, clips, holders) from the old rack if needed
Slide the new rack onto the rails, reinstall the stops, and verify it glides smoothly before running a cycle

$205.76

Compare At:: $244.85
You Save:: $39.09

IN STOCK

Ships Monday Guaranteed

Add to Cart

Questions & Answers

For Whirlpool Dishrack (Dishwasher Rack) (Part Number: OEM17965992)

Bob February 19, 2016

Hi I have an older Kenmore dishwasher that takes lower rack part number 8193989. When I looked it up on your site it crossed to a W10833650. Looking at the pictures Mine has a cutout in the front right side so the soap dispenser on the door can open. The new one does not. Is this the correct number? will My soap dispenser still open?

1 Answer

Hello Bob. Based on the information you provided, W10833650 is the correct rack and should work fine in the unit.

Jeffrey November 25, 2015 for Model Number KUDP02FRSS0

I need a LOWER DISHRACK ASSEMBLY--for a Kitchenaid Dishwasher: MOD: KUDP02FRSS0, SER: FS3903340, TYPE: 577-0 I believe I need Part # AP3728100; however your site says it is no longer available. What can I get as a suitable replacement?

1 Answer

Hello Jeffery. Call us at 1-877-477-7278 and we will be glad to get this part W10833650 ordered for you!!!!

Jw April 15, 2015 for Model Number Kenmore Ultra Wash 66515791791

I need to replace the lower rack on this Kenmore dishwasher. It is about 14 years old and works perfectly except for the broken and rusted tines on the lower rack. The rack I have is white. Is there a replacement available for this model? If so, what is the correct part number? Thank you.

1 Answer

JW, the replacement lower rack is part number W10833650. Thanks!

Bob January 31, 2015

Does part # 8193989 come with the wheels? The photo is not real clear.

1 Answer

Hello Bob! Yes, the lower rack W10833650 includes the wheels. Thanks!

Brenda December 26, 2014

How do you remove the lower middle water deflector that is attached to old rack that I am replacing? Part # 8193989

1 Answer

Brenda, The middle sprayer would just clip onto the rack. There may be a screw that may hold the part.

Ralph A. December 04, 2014 for Model Number DU927QWDB1

What lower rack p/n should I order to replace the rusting OEM rack?

1 Answer

Ralph, the lower rack listed for your model is part number W10311986. Thanks!

Martha A November 22, 2014

I have a Kenmore model #17625692 and I need a new lower rack, but I'm not sure what part number to use.Thanks!

1 Answer

Martha, The part number for the lower rack that you would need for your dishwasher is W10833650.

Silver Spring November 20, 2014 for Model Number 66516831771

I have a very old Kenmore washing machine which needs a replacement bottom rack (rusted tines) I can't locate the model number anywhere (665.16831771) It looks like this rack will fit? What do you think?

1 Answer

Hello! Could your model possibly be 66516831791 (791 instead of 771)? The manufacturer doesn't offer a 66516831771 model. If the found model is correct the replacement lower rack is part number W10833650. Thanks.

Frank August 30, 2014 for Model Number Kenmore 66515769000

Looking for lower dish rack

1 Answer

Frank, The lower dishwasher rack for your unit is part number W10833650.

Dave August 07, 2014

I ordered part #8193989 which is the lower rack assembly for my Kenmore dish washer. The rack came without the two fold down sets of tines. They are clearly shown in the picture. Also the note in the box says it's part #4389222. What's up with this? The rack fits fine just missing the parts.

1 Answer

Hello Dave! Unfortunately, due to manufacturer changes the rack no longer includes the fold down tines. Sorry about that!

Have questions? Ask our pros!

Call us 1-877-477-7278

Need Help? Chat with a Pro

Or ask a question by filling in the form

Share your thoughts with other customers

Appliance

Appliance

Lawn & Garden

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Customer Questions and Answers for Dishrack (Dishwasher Rack) by Whirlpool

Dishrack (Dishwasher Rack)

Questions & Answers

1 Answer

1 Answer

1 Answer

1 Answer

1 Answer

1 Answer

1 Answer

1 Answer

1 Answer

1 Answer

Have questions? Ask our pros!

Or ask a question by filling in the form

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Customer Questions and Answers for Dishrack (Dishwasher Rack) by Whirlpool

Questions & Answers

Have questions? Ask our pros!

Or ask a question by filling in the form

Ask your question