John March 14, 2016 My ceran glasstop cracked into several pieces. Can it be replaced without replacing the entire cooktop unit? What holds the glasstop in place? I see a rubber strip along the frame that attaches to the glass but no tape under the pieces i removed.
1 Answer Hello John. We will need your model number to help you with this. Please call 1-877-477-7278 or post your model number with a new question on the parts page. http://www.appliancepartspros.com/modelnumber_locator.aspx Read More...
Stanley January 04, 2015 for Model Number KGSC308LSS0 Is there a gasket for the front where the glass top meets the control panel?
1 Answer Stanley, The gasket for the cooktop that goes between the cooktop and control panel is 9754103. Read More...
Marcia December 09, 2012 for Model Number KESC300hbl5 We are having to replace the ceramic cook top on our stove and need to know how to place the sticky side of the foam seal #9754103
1 Answer Hello Marcia, The sticky side of the seal will go around the perimeter of the cooktop glass. Read More...
Marcia December 09, 2012 for Model Number KESc300hbl5 We are replacing the ceramic cooktop & need to know if the sticky side of the foam seal #9754103 goes on the stove or the ceramic?
Terry July 18, 2012 for Model Number kesc307hwh4 I took off my broken cooktop and the gasket (foam rubber tape) was placed on the underside of the glass, extending passed the glass by about a 1/4 inch, on both sides and the back. Is this the correct way it should fit? Thanks
1 Answer Hello Terry, As long as the foam tape doesn't extend past the edge, showing from under the glass when in the installed position, yes, this would be correct. Read More...
1 Answer Hi Mike. This inner rail gasket is inserted on the inner sides of the 2-side and the back rails so the glass top is sealed and cushioned in between the two. Gasket part # 9754103. Thank You. Read More...