Customer Questions and Answers for Outer Door Glass by Whirlpool

Richard, The outer door glass for your range is part number WP8053834.

Betsy, the bisque outer door glass is part number WPW10118456. Thanks!

Hello Kimber2. 1. Open the door approximately half way and install a nail or screw into the hinge hangers on each side of the door. Do not remove them while the door is removed from the range. 2. Close the oven door as far as the nails or screws will allow. 3. Grasp the sides and lift the door until it stops, then rotate the door toward the floor, and pull it toward you. IMPORTANT: Do not use the door handle to lift the door. 4. Remove the screws and disassemble the oven door to replace the front glass WP8053834. 5. Reassemble the oven door. To reinstall the oven door: 1. Grasp the sides of the door with your fingers on the front of the door and your thumbs on the inside surface. 2. Rest the bottom of the hinge hanger on the bottom of the slot in the range. 3. Position the door with the hinge hanger slots almost parallel to the front frame. 4. Push up and in until the hinge hanger slots become fastened to the range, then lower the door, and rotate it slightly from the front to the back until the slots are fully fastened. The hinge hanger will be close to the bottom of the front frame slot. 5. Pull the door open about half way and remove the nails or screws. 6. Close the door. Hope this helps.

Hello Mickey, from the manufacturer the measurments should be approx 29 7/16"w X 20 1/8" H, for the bisque color you will want to order part number WPW10118456. Thanks!