1 Answer Ben, a 7mm and a 3/8" wrench would be needed for the orifices. To remove the burner heads to access the orifices, a Torx bit driver would be needed (commonly a T15, T20, or T25). Read More...
Tammy June 27, 2023 for Model Number WFG320M0BB1 Does this include instructions to tell me which orifice goes to which burner?
1 Answer Tammy, the LP installation instructions would be found in the appliance installation guide for the model provided. The LP kit WPW10619558 does not include installation instructions. Read More...
Sara June 08, 2022 Hello I ordered the orifice kit for my Whirlpool gas stove. model #WFG320M0BS3 ser#VE73528621 If I use the orifice for the stove part will that work at all? I see these are for propane. If it will work what could I order to work please?
1 Answer Sara, if this unit is being supplied with LP, the orifice kit WPW10619558 will work with the model provided, including the oven burner orifice. Read More...
Charles March 07, 2019 for Model Number wfg320mobs What parts do I need to change from propane back to natural gas? Thanks
1 Answer Charles, you will need to change the orifices and set the regulator for natural gas. The orifices are as follows: right and left front [WPW10347414], left rear [W10170508], and right rear [W10170506]. Read More...
Lauren S March 24, 2018 I need to change our Gas range (Whirlpool GW399LXUS06) from Propane back to Natural Gas. I think the only part I need is larger orifices. Most conversion kits seem to be to supply the smaller orifices for the propane. I need to find the bigger (Original) ones to convert back natural gas. Do you have these in stock?
1 Answer Lauren, To convert this unit back to natural you will want to replace the orifice holders Right front WPW10407678, left front 74010961, right rear [WPW10407679], and left rear WPW10407680. For the oven you will want to loosen the orifices 1 1/2 to 2 turns and close the air shutters to about 3/4 way open. Read More...