John Y. February 20, 2012 for Model Number MAV5000AWW Water continues to trickle into tub even though washer has completed its cycle. When I turn off the hot water supply the trickle stops. New water valve?? Thank you.
1 Answer John, you will need to replace the water valve. Your part number is WP22002707. Thanks! Read More...
1 Answer Hello Mark. You will need to remove the screw securing the water valve bracket. Then you can remove the valve out of the back of the unit and install the new water valve WP22002707. Hope this helps. Read More...
Richard R. February 05, 2012 for Model Number mav6200aww Water is hot in the hot setting, however in the warm setting it is very cool, could it be the mixing valve or a screen?
1 Answer Hello Richard. If the cold water valve is letting in more water than the hot, you will need to replace the water valve WP22002707 on the unit. Hope this helps. Read More...
2 Answers Hello Bill! Check the water valve, if it is getting power and not filling it will need to be replaced. Your part number is WP22002707. Thanks. Read More...
2 Answers Hello Bill. You will need to test the lid switch 12001908 and make sure it is good. If not, it will need to be replaced. If it is good, check and make sure the water valve is not clogged. You can switch from hot to cold or cold to hot. If it starts to work, you will need to replace the water valve WP22002707. You can test this with a multi-meter MA-DM1. Here is a link on how to use a multi-meter. Hope this helps. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More...