Skip to Content
  • time delivery images 2 Day Quick Delivery!
  • box-refresh images 365 Day Return Policy!
  • lovely images 15 million satisfied customers
  • boxes images Over 2.1 Million Parts In Stock
  • headphone imagesFree Tech Support!
  • google images Google Trusted Store

Need Help?

Chat with a Pro

Call or text

1-877-477-7278
Cart

Estate Dryer TEDS840JQ2 Heat stays on after drum has stopped

Heat stays on after drum has stopped is the 11st most common symptom for Estate TEDS840JQ2. It takes Less than 15 minutes to fix on average. The instructions below from DIYers like you make the repair simple and easy. Many parts also have a video showing step-by-step how to fix the "Heat stays on after drum has stopped" problem for Estate TEDS840JQ2. So, if your TEDS840JQ2 dryer finishes cycle and drum stops but element stays on, heating element stays hot when dryer is not running or Heating element stays on after drum stops, the following info will help you identify the problem.

Parts for Estate TEDS840JQ2

Cause #1 Dryer Drum Belt 92-1/4" 4-Rib
99%of the time
Total Satisfaction Rating (1834)
Best Seller
Manufacturer Part
Sale

Dryer Drum Belt 92-1/4" 4-Rib for Estate TEDS840JQ2 Heat stays on after drum has stopped

Manufacturer's Part Number: 341241
Genuine Whirlpool part

Get your dryer spinning smoothly again - install the Whirlpool 341241 OEM Drum Belt in minutes.

Why this belt?

  • Exact factory spec: 92 ¼-inch length × ¼-inch width, 4 ribs / 3 grooves - built to Whirlpool standards, not a generic copy.
  • Broad compatibility: Fits most Whirlpool-made dryers - Kenmore 110-series, Roper, Estate, Maytag, KitchenAid, Admiral, Crosley, Amana & more.
  • Quiet, durable rubber: Reinforced EPDM resists cracking and stretch for years of reliable tumbling.

Fixes these common dryer problems

Problem How the belt solves it
Drum won’t turn Transfers motor rotation to drum
Loud squealing / thumping Replaces stretched or frayed belt
Burning-rubber smell New belt stops slippage & heat build-up
Damp clothes / long cycles Restores correct drum speed & airflow


DIY install — about 15 minutes

  1. Unplug dryer; remove lint screen housing & front panel.
  2. Release belt tension at idler pulley; lift drum slightly to slide old belt off.
  3. Loop new belt around drum, idler pulley and motor pulley (ribbed side down).
  4. Re-assemble, run test cycle - enjoy quiet, consistent tumbling.

This part fixes the following symptoms
  • Heat stays on after drum has stopped
  • Will not tumble
  • Touchpad does not respond
  • No heat or not enough heat
  • Won't start
$14.64
Compare At:
$17.42
You Save:
$2.78

In Stock Less than 100 left
Ships Today Guaranteed

Order now and we'll ship it out Today

Over 94% of our orders are delivered in 2 days or less

Cause #2 Dryer Heating Element
Less than 1%of the time
Total Satisfaction Rating (1639)
Best Seller
Manufacturer Part
Sale

Dryer Heating Element for Estate TEDS840JQ2 Heat stays on after drum has stopped

Manufacturer's Part Number: 279838
Genuine Whirlpool part

Restore full heat and end long dry cycles - install the Whirlpool OEM Dryer Heating Element.

Why this heating element?

  • Factory-spec 5400 W / 240 V heating element with nickel-chromium coil - built by Whirlpool to Whirlpool OEM standards.
  • Broad compatibility: fits Whirlpool, Kenmore 110-series, Roper, Estate, Amana, Maytag & more 27-inch dryers.
  • Built to last: high-temp terminals & mica insulation resist fatigue and hotspots.

Fixes these common dryer problems

Problem How the element solves it
No heat / cold drum Replaces burned-out coil to restore heating circuit
Takes forever to dry Full wattage brings drum back to target temperature
Stops mid-cycle Prevents over-cycling caused by faulty element
Burning smell New coil eliminates hot-spot arcing & insulation burn


DIY install — about 20 minutes

  1. Unplug dryer and remove back panel to access heater housing.
  2. Disconnect wires; remove housing screws and slide assembly out.
  3. Swap old element for new, re-use hi-limit thermostat if still good.
  4. Re-assemble, run test cycle - enjoy fast, even drying.

This part fixes the following symptoms
  • No heat or not enough heat
  • Doesn't shut off
  • Touchpad does not respond
$53.95
Compare At:
$64.74
You Save:
$10.79

In Stock Less than 100 left
Ships Today Guaranteed

Order now and we'll ship it out Today

Over 94% of our orders are delivered in 2 days or less

  • boxes images Over 2.1 Million Parts In Stock
  • time delivery images 2 Day Quick Delivery!
  • box-refresh images 365 Day Return Policy!
  • headphone imagesFree Tech Support!
  • google images Google Trusted Store
​