Frigidaire Refrigerator RT181MCD0 Fridge runs too long

The Defrost Timer is an OEM part for Frigidaire refrigerators. It is an essential electronic component that controls the automated defrost cycle of the refrigerator. The defrost timer monitors run times and temperatures to determine when to initiate the defrost process. It allows the refrigerator to operate efficiently by preventing excessive ice buildup. This defrost timer is designed to run for 30 minutes every 8 hours. 

Symptoms of a bad defrost timer include: 

• Inability to initiate or maintain the defrost cycle 
• Excessive ice buildup in the freezer compartment
• Erratic temperature fluctuations
• The refrigerator running excessively or displaying other performance issues

Causes of a bad defrost timer can be normal wear and tear over time. Environmental factors like power surges or fluctuations may also impact the electronic timer functionality. 

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

The Defrost Thermostat is an OEM part for Frigidaire refrigerators. It monitors the temperature of the evaporator coils and activates the defrost heater when necessary. This process prevents frost buildup on the coils, ensuring the refrigerator maintains optimal cooling efficiency.

You should replace the defrost thermostat if it becomes faulty or damaged. Common causes of a bad defrost thermostat include electrical failures, regular wear and tear, or temperature fluctuations that can degrade the component over time.

Symptoms of a bad defrost thermostat include:

• Excessive frost buildup on the evaporator coils
• Refrigerator not cooling properly
• The defrost cycle not activating
• Increased energy consumption

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Refrigerator Door Gasket is an OEM part for Frigidaire refrigerators. It provides a tight seal around the refrigerator door, ensuring that cold air stays inside and warm air stays out, maintaining optimal temperatures for food preservation. The gasket measures approximately 29-1/2" wide x 44" long. 

Causes of a bad door gasket can include wear and tear over time, damage from frequent opening and closing of the door, or improper cleaning that leads to cracks or tears. A compromised gasket can lead to energy inefficiency and affect the refrigerator's performance.

Symptoms of a bad door gasket include:

• Noticeable gaps between the door and the refrigerator
• Increased energy consumption
• Frost buildup around the door seal
• Difficulty in closing the refrigerator door properly

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.