Frigidaire Washer FTF1240FS2 Noisy

The Shock Absorber Kit is an OEM part for Frigidaire washing machines. It is a comprehensive kit that includes 2 shock absorbers, 1 locking pin, 4 lock nuts, and a set of instructions. These shock absorbers play a vital role in reducing vibrations and absorbing shocks during the washing cycle, providing stability and minimizing excessive movement.

Causes of a bad shock absorber can include wear and tear over time, exposure to heavy loads or unbalanced loads that put excessive strain on the absorbers, or damage due to impact or mishandling.

Symptoms of a bad Shock Absorber include:

• Excessive shaking or vibrating during the wash cycle
• Loud banging noises
• The washer moving or walking during the operation
• Leaks due to increased stress on the tub and other components

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

The Drain Pump is an OEM part for Frigidaire washing machines. It's engineered to efficiently remove used water from the washer at the end of each wash cycle, playing a critical role in the appliance's ability to prepare for the next load.  

Causes of a bad drain pump include blockages from small items or debris, mechanical failure due to wear and tear, or electrical issues preventing the pump from operating. 

Symptoms of a bad Drain Pump include:

• Water not draining from the washer
• Unusual noises coming from the pump area, indicating a blockage or failure
• The washer not completing its cycle
• Error codes displayed on the washer related to draining issues

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The Suspension Spring Kit is an OEM replacement part for Frigidaire front-loading washing machines. These suspension springs are positioned at the top front of the washer, underneath the tub, to help support the weight of the drum during operation.

Over many cleaning cycles, suspension springs can wear down and lose their ability to dampen vibration.

Symptoms of bad suspension springs include:

• Excessive shaking or rattling of the washing machine
• Loud banging or knocking noises coming from inside the washer
• The tub moving excessively during washing and spinning

It is also compatible with Electrolux, Gibson, Kelvinator, and some Kenmore models.

The Drum Drive Belt is an OEM part for Frigidaire dryers. It connects the drum to the motor, enabling the drum to rotate and tumble the clothes during drying cycles. The belt is 54 inches long and 5/8 inches wide

You should replace this drum drive belt if it becomes worn out, frayed, or broken due to the high heat and friction involved in the drying process. Additionally, improper loading or overloading of the dryer can cause the belt to stretch or snap.

Symptoms of a bad drum drive belt include:

• Dryer drum not turning
• A loud thumping or squealing noise during operation
• Dryer stopping mid-cycle
• Clothes remaining wet after the drying cycle

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

Spider arm is not available separately.

The Gasket is an OEM part for Frigidaire washing machines. This part is located between the front and rear outer tubs and prevents water leaks by maintaining a watertight seal between them. The gasket acts as a barrier to ensure that water used during the washing process remains contained within the inner tub, preventing it from seeping into the washing machine's surrounding components.  

Causes of a bad gasket can include regular wear and tear, exposure to harsh detergents, or deterioration over time.  

Symptoms of a bad gasket include:

• Water leaking from the outer tub area
• Visible cracks or deterioration in the gasket material
• The washing machine not holding water properly
• Increased noise or vibration during operation

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

Includes bearing and seal. Bearing is not available separately.