General Electric Dryer DCCH43GA3WW Noisy

The Drum Support Bearing is an OEM part for GE dryers. This part allows the smooth rotation of the dryer drum. This small yet crucial component plays a pivotal role in the dryer's operation, supporting the back of the drum as it turns, and ensuring that clothes are dried evenly and efficiently.

Over time, the drum support bearing may wear out or become damaged due to the constant friction and heat generated during the dryer's operation.  

Symptoms of a bad Drum Support Bearing include:

• A squealing or grinding noise during operation, indicating that the bearing is worn out.
• Difficulty turning the drum by hand.
• Excessive vibration or shaking of the dryer.
• Increased drying times, as a result of the drum not maintaining the correct speed due to bearing friction.

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Rear Drum Bearing Kit is an OEM part for GE dryers. The kit includes a rear bearing, shaft support, ball shaft, ball bearing, ball bearing retainer, high-temperature lubricant, and screws required for installation. 

Causes of a bad rear drum bearing can include normal wear and tear over time, exposure to excessive heat, or heavy use that puts strain on the bearing. A failing bearing can cause the drum to become misaligned, creating friction and noise during operation.

Symptoms of a bad rear drum bearing include:

• Squeaking or grinding noises when the dryer is running
• The drum being difficult to turn manually
• Clothes not drying evenly due to improper drum rotation
• The dryer stopping mid-cycle or failing to start

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This drum glide provides a smooth, low-friction surface at the front of the dryer drum. Replacing worn glides restores quiet, even drum rotation and helps prevent scraping and fabric damage.

• Supports the front of the drum and allows smooth rotation on the front bearing/bulkhead
• Reduces friction and metal-on-metal contact to minimize noise and wear
• Helps maintain proper drum alignment and spacing at the door opening
• Common symptoms of a worn glide: scraping or squealing while tumbling, drum hard to turn, brown/black marks on clothes, or snagging at the front edge

• Disconnect power; shut off gas supply for gas dryers before servicing
• Remove the top and front panel/bulkhead to access the front drum support
• Support the drum when the front panel is off to avoid stressing the rear bearing
• Many models use multiple glides; inspect all front support wear items (glides/slides and felt seal) and replace as needed for even wear

The Dryer Belt is an OEM part for GE dryers. This belt wraps around the drum, motor pulley, and tension pulley, enabling the drum to spin during the drying cycle. It plays a crucial role in the mechanical operation of the dryer.

Common causes of a bad dryer belt include normal wear and tear from repeated use, overloading the dryer, or damage from obstructions inside the drum.

Symptoms of a bad dryer belt include:

• The drum not turning when the dryer is running
• A burning smell during operation
• Unusual noises such as thumping or squeaking
•  The dryer stopping mid-cycle

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This upper drum felt is the replacement seal that cushions and guides the dryer drum for quieter operation and smoother rotation. It helps protect the drum edge and prevents clothes from catching where the drum meets the front bulkhead. What it does:

• Cushions the drum and reduces metal-on-metal rubbing that causes squeaks or grinding noises
• Keeps garments from getting caught between the drum and cabinet edge
• Helps maintain proper drum alignment for even rotation
• Limits lint and airflow loss at the drum front to support optimal drying performance

What's included: One upper drum felt seal Install notes:

• Disconnect power before servicing; for gas dryers also shut off the gas supply and disconnect the gas line per manufacturer instructions
• Remove the dryer front panel or bulkhead as required to access and replace the upper felt; keep track of fasteners and orientation
• Inspect the drum, drum rollers, glide, and lower felt while servicing and replace any worn parts to prevent premature wear of the new felt