Jenn-Air Dishwasher JDB6510AWK Will not drain or doesn't drain

Name: Impeller And Seal Kit
Brand: Whirlpool
Rating: 5.00 (4 reviews)

Will not drain is the most common symptom for Jenn-Air JDB6510AWK. The instructions below from DIYers like you make the repair simple and easy. Many parts also have a video showing step-by-step how to fix the "Will not drain" problem for Jenn-Air JDB6510AWK. So, if your JDB6510AWK dishwasher does not drain the water at end of cycle, doesn't drain water at end of cycle, not draining, sitting water, water won't drain or won't drain the water, the following info will help you identify the problem.

Parts for Jenn-Air JDB6510AWK

Cause #1 Water Level Switch (Float)

39%of the time

Total Satisfaction Rating (6)

Best Seller

Manufacturer Part

Water Level Switch (Float) for Jenn-Air JDB6510AWK Will not drain

Manufacturer's Part Number: WP99002560

Genuine Whirlpool part

This water level switch senses the dishwasher's tub float and controls the water inlet. Replacing a worn switch restores correct filling, helping prevent overfilling or dry cycles that can reduce cleaning performance. What it does:

Monitors the float position to open/close the fill circuit at the proper water level
Common symptoms: dishwasher won't fill or stops filling too soon
May also cause continuous filling/overfill if contacts are stuck closed
Intermittent operation can leave the tub underfilled and washing performance poor

What's included:

1 water level (float) switch

Install notes:

Disconnect power and shut off the water supply before servicing
Remove the toe/kick panel to access the switch near the float assembly under the tub
Note wire positions; transfer connectors one at a time and secure the switch in its bracket
The float moves freely and actuates the switch before reassembly and testing

This part fixes the following symptoms