Need Help?
Call or text
Will not drain is the most common symptom for Kenmore 363.1442192 (3631442192, 363 1442192). The instructions below from DIYers like you make the repair simple and easy. Many parts also have a video showing step-by-step how to fix the "Will not drain" problem for Kenmore 363.1442192. So, if your 363.1442192 dishwasher does not drain the water at end of cycle, doesn't drain water at end of cycle, not draining, sitting water, water won't drain or won't drain the water, the following info will help you identify the problem.
Parts for Kenmore 3631442192
The Complete GE Pump and Motor Assembly is an OEM replacement part for GE dishwashers. This assembly is integral to the dishwasher’s functionality, as it combines both the pump and motor components that work together to circulate water during the wash and rinse cycles. The pump forces water through the spray arms, while the motor drives this process, ensuring thorough cleaning of the dishes.
Over time, the pump and motor assembly can wear out due to constant use and exposure to water and detergents. Additionally, debris or hard water buildup can clog the pump, causing strain on the motor and leading to failures. Electrical issues or damage from power surges can also impair the assembly's performance.
Symptoms of a bad pump and motor assembly include:
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Order now and we'll ship it out Today
Over 94% of our orders are delivered in 2 days or less
The Drain Solenoid is an OEM part for GE dishwashers. This component controls the draining function by opening and closing the drain valve, ensuring that water is properly expelled from the dishwasher at the appropriate times during the wash cycle.
Common causes of a bad drain solenoid include electrical malfunctions, buildup of debris or mineral deposits, and general wear over time. These issues can prevent the solenoid from operating correctly, leading to improper draining.
Symptoms of a bad drain solenoid include:
This kit is used to repair a leaking pump on GE made dishwashers. For a complete pump/motor assembly get WD26X10013.
This part is discontinued by the manufacturer and is no longer available for purchase.
The Solenoid Armature and Linkage is an OEM replacement part for GE dishwashers. It is responsible for controlling the dishwasher's draining process by operating the drain valve, which regulates the flow of water out of the dishwasher during the drain cycle.
Symptoms of a bad solenoid armature and linkage include:
Causes of a bad solenoid armature and linkage can include mineral buildup or debris obstructing the valve, electrical malfunctions in the solenoid coil, or mechanical wear and tear of the linkage components.
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore dishwasher models.
The Dishwasher Water Inlet Valve is an OEM part for GE dishwashers. It controls the flow of water into the dishwasher during each cycle phase. The valve regulates water pressure and volume to provide the right amount for washing, rinsing, and adjusts flow based on cycle settings.
Causes of a bad water inlet valve include mineral buildup from water hardness inhibiting movement or damage allowing leaks.
Symptoms of a bad inlet valve are:
This genuine GE OEM replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
The Drain Hose is an OEM part for GE dishwashers. This part carries the wastewater from the dishwasher to the household plumbing, ensuring efficient and effective drainage after each wash cycle.
Causes of a bad drain hose can include regular wear and tear, kinks or bends that restrict water flow, or damage from improper installation.
Symptoms of a bad drain hose include:
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
The Tub Corner Baffle is an OEM part for GE dishwashers. This rubber component is placed in the corners of the dishwasher tub to prevent water from leaking out during the wash cycle. It acts as a barrier, directing water back into the tub and ensuring efficient operation. This is the left side. For the right side, use WD8X227.
Causes of a bad part can include prolonged exposure to detergents and hot water, leading to material breakdown, or physical damage from loading and unloading dishes.
Symptoms of a bad Tub Corner Baffle include:
This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.
The Tub Corner Baffle is an OEM part for GE dishwashers. It is strategically placed at the corners of the dishwasher tub to prevent water from leaking out during operation. For the left side use WD8X228. Color: Black.
Causes of a bad tub corner baffle can include wear and tear from regular use, improper installation leading to gaps or looseness, and degradation of the material over time due to exposure to detergents and high temperatures.