Kitchenaid Mixer 5KPM5BER4 Touchpad does not respond

The K5AWW 5 Quart KitchenAid Wire Whip is an OEM part for Whirlpool stand mixers. This wire whip is designed to incorporate air into mixtures, making it ideal for whipping cream, beating egg whites, and mixing light batters.

You should replace the wire whip if it becomes damaged or worn out. Causes of a bad wire whip can include regular wear and tear from frequent use, bending or breaking of the wires, or rust and corrosion due to exposure to moisture.

Symptoms of a bad wire whip include:

• Bent or broken wires
• Rust or discoloration on the whip
• Ineffective whipping or mixing results
• The whip not fitting securely onto the mixer

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Worm Gear is an OEM part for Whirlpool mixers. This part drives the rotation of the planetary assembly. The planetary assembly is where the mixer's accessories attach.

You should replace the worm gear if it becomes worn out or damaged. Causes of a bad worm gear can include excessive strain from heavy or dense mixing tasks, lack of lubrication, or general wear and tear over time. 

Symptoms of a bad worm gear include:

• The mixer attachments not turning
• Grinding or clicking noises during operation
• The mixer motor running but the attachments remaining stationary

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Motor Brush is an OEM part for Whirlpool mixers. It is designed to conduct electricity between the stationary and rotating parts of the motor, allowing the motor to function effectively. 

Causes of a bad motor brush can include regular wear and tear from frequent use, buildup of carbon deposits, or damage due to electrical issues. Over time, the brushes can wear down, leading to reduced conductivity and motor performance.

Symptoms of a bad motor brush include:

• The mixer motor not running or running intermittently
• Sparking or unusual noises coming from the motor area
• Reduced mixing performance or failure to operate at certain speeds

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Flat Beater is an OEM part for KitchenAid stand mixers. Designed to fit the 5-quart bowl-lift models, this flat beater is essential for thoroughly mixing ingredients with minimal air incorporation. It's perfect for blending cake batters, cookie doughs, and preparing other dense mixtures. Made from high-quality materials, this beater ensures durability and reliability during use.

Causes of a bad K5AB 5 Quart KitchenAid Flat Beater can include metal fatigue, coating chipping off, or bending due to heavy use. These issues can compromise the mixer's performance and the quality of your mixtures.

Symptoms of a bad K5AB 5 Quart KitchenAid Flat Beater include:
Ingredients not being mixed thoroughly.
Scraping or chipping of the beater's coating.
The beater not fitting properly onto the mixer.

The flat beater is top-rack dishwasher safe and used with Kitchenaid Stand Mixer models K5SS, KDM5, KP50, KPM5, KPM50, KSM5, KSM50, KSMC50, 3K5SS, 3KSM5, 4K5SS, 4KPD1620, 5K5SS, 5KPM5, 5KPM50, 7K5SS, 9KSM5. This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

The Worm Gear and Bracket Assembly is an OEM part for Whirlpool appliances, specifically designed for use in certain models of stand mixers. This assembly is responsible for transferring the motor's power to the mixing attachments, ensuring smooth and efficient operation. The worm gear works in conjunction with other gears to reduce the motor's speed while increasing torque, allowing the mixer to handle heavy doughs and batters.

You should replace the worm gear and bracket assembly if it becomes faulty. Causes of a bad worm gear and bracket assembly can include wear and tear from regular use, overloading the mixer with heavy ingredients, or lack of proper maintenance. A malfunctioning worm gear can lead to issues with the mixer's performance and efficiency.

Symptoms of a bad worm gear and bracket assembly include:

• The mixer attachments not turning or moving irregularly
• Unusual noises such as grinding or clicking during operation
• The mixer motor running but the attachments not moving
•  Reduced power or inconsistent mixing performance

This OEM part ensures your stand mixer operates at peak performance, handling all your mixing needs with ease. The assembly is also compatible with some models from KitchenAid, Jenn-Air, and other brands under the Whirlpool umbrella.

Notes: 10 and 23 teeth. For worm gear only order WPW10112253. For grease order 4176597.

The Lift Arm is an OEM part for Whirlpool stand mixers. This lift arm supports the mixing bowl and allows it to be raised or lowered for optimal mixing and access. It ensures that the bowl is securely held in place during operation, enabling the mixer to function efficiently and safely.

Common causes of a bad lift arm include wear and tear, bending or breaking from heavy loads, or misalignment from frequent adjustments.

Symptoms of a bad lift arm include:

• Difficulty raising or lowering the mixing bowl
• The bowl not staying securely in place
• Unusual noises or grinding sounds during adjustment
• The mixer not functioning properly due to improper bowl positioning

This OEM part is also compatible with some KitchenAid and other stand mixer models.

The Thumb Screw is an OEM replacement part for Whirlpool stand mixers. It acts as a fastener for securely attaching mixing attachments like the flat beater, whisk, or dough hook onto the power hub. Color: Black. It measures about 1-½” wide by ¾” high.

Causes of a bad thumb screw can include wear and tear from repeated securing and loosening of mixing attachments over time. 

Symptoms of a bad thumb screw include:

• Mixing tools detaching or falling off during use  
• Difficulty attaching or removing attachments
• Looseness where the screw mounts to the power hub

This OEM Whirlpool part is also compatible with KitchenAid, Kenmore, and some Bosch and Breville stand mixers.